🍪 CompoundTalk uses cookies to improve your experience, analyze traffic, and personalize content. By continuing to use this site, you agree to our Cookie Policy.
Evidence-based GLP-1 & peptide discussion since 2023
ForumsBuyer BewareHas anyone dealt with ⚠ swiss chems fda warning letter december 2024?

Has anyone dealt with ⚠ swiss chems fda warning letter december 2024?

WendyG_ATL Tue, Jan 20, 2026 at 12:10 AM 22 replies 703 viewsPage 1 of 5
WendyG_ATL
Member
1,023
5,678
Apr 2024
Georgia
Jan 20, 2026 at 1:35 AM#1

⚠️ QUALITY ALERT ⚠️

I sent a vial of compounded semaglutide (Lot# SEM-2026-0287) to an independent lab for full panel testing. Identity and potency came back fine (97.4% — no complaints there). But the endotoxin test came back POSITIVE.

LAL (Limulus Amebocyte Lysate) test result: 8.2 EU/mL

The USP limit for injectable products is 5 EU/kg/hr, and most compounding pharmacies use a limit of ≤0.5 EU/mL for their products.

My result is 16x over the typical limit. I've been using this vial for 2 weeks.

I'm freaking out. What are the health implications? Has anyone else had this experience? I've already reported this to the pharmacy and my state board. I'm naming the pharmacy in this post because I think people need to know — it's [REDACTED BY MOD].

21 8Dr.SurgeonPGH, rachel_ABQ, traveltech_sara and 18 others
Reply Quote Save Share Report
wei_SG
Member
234
890
Nov 2024
Singapore, SG
Jan 20, 2026 at 1:52 AM#2

Andy, I've redacted the pharmacy name per forum rules — we can't allow naming without verified documentation. Please send the lab report to mod mail and we'll review. If verified, we'll allow the name to be posted. This protects both the community and the forum from liability.

That said, this is a serious report and I'm escalating it internally. 🔴

Last edited: Jan 20, 2026 at 2:52 AM
26 18SaraMom3, Dr.MetabolicMD, RetaRick_CA and 23 others
Reply Quote Save Share Report
Dr.MetabolicMD
VIP Member
2,345
16,789
Jan 2024
Rochester, MN
Jan 20, 2026 at 2:09 AM#3

Andy — first, take a breath. Let me explain what this means clinically.

Endotoxins are lipopolysaccharides (LPS) from gram-negative bacterial cell walls. They can cause:

  • Fever (pyrogenic reaction)
  • Chills, body aches
  • In severe cases: sepsis, organ dysfunction

However, the risk depends on the dose delivered and your body's response. At 8.2 EU/mL with a small injection volume (say 0.1-0.2mL for a typical sema dose), your actual endotoxin exposure per injection was roughly 0.8-1.6 EU. For a 70kg person, the USP limit is 350 EU/hr (5 EU/kg × 70kg). So you were well under the systemic toxicity threshold.

That doesn't make it OK — the product fails specifications and shouldn't have been released. But you're likely not in medical danger from what you've already injected.

STOP using this vial immediately. If you develop fever, chills, or signs of infection at the injection site, go to the ER and tell them about the endotoxin exposure.

19 9HealthEcon_DC, PedsEndoPhilly, SleepDoc_PDX and 16 others
Reply Quote Save Share Report

PeptideMeter — Independent Peptide Analytics

Community-driven peptide testing and vendor rating platform. Transparent results. Unbiased analysis. Trusted by thousands.

View Results
MariaRD
Member
823
4,567
Jun 2024
New Mexico
Jan 20, 2026 at 2:26 AM#4

Thank you for running those numbers. That math actually makes me feel a lot better. I haven't had any fever or unusual symptoms beyond normal sema side effects. Stopped using the vial immediately when I got the results.

I've sent the full lab report to mod mail. Happy to have the pharmacy name posted once verified. People need to know.

22 1rick_sfbay, maria_elpaso, anders_CPH and 19 others
Reply Quote Save Share Report
SallyK_inj
Member
567
2,345
Jul 2024
Iowa
Jan 20, 2026 at 2:43 AM#5

Former QC lab director weighing in. An endotoxin result of 8.2 EU/mL indicates a fundamental failure in sterile manufacturing processes. Endotoxins come from gram-negative bacteria, which means at some point in the production chain, bacterial contamination occurred. Even if the bacteria were killed during filtration/sterilization, endotoxins are incredibly heat-stable and difficult to remove.

This could indicate:

  • Contaminated raw materials (API or water)
  • Inadequate depyrogenation of glassware
  • WFI (Water for Injection) system failure
  • Environmental monitoring failures in the cleanroom

If one batch has this issue, others from the same facility likely do too. This is a systemic problem, not a one-off.

38 18Dr.PathRoch, mona_PHX, andrew_nyc and 35 others
Reply Quote Save Share Report
1235

Similar Threads

⚠ Peptide Sciences SHUT DOWN March 6, 2026 — what happened and what to do now8 replies
⚠ Amino Asylum raided by FDA June 2025 — warehouse seized6 replies
⚠ Swiss Chems FDA warning letter December 2024 — selling unapproved drugs6 replies
⚠ 50+ FDA warning letters sent to peptide vendors in 2025 — full list4 replies
⚠ Finnrick exposed: some vendors scoring E grade on basic peptides4 replies
ForumsNewTrendingMembersAccount

Log In

Forgot password?
No account? Register