🍪 CompoundTalk uses cookies to improve your experience, analyze traffic, and personalize content. By continuing to use this site, you agree to our Cookie Policy.
Evidence-based GLP-1 & peptide discussion since 2023
ForumsBuyer Beware⚠ Swiss Chems FDA warning letter December 2024 — my results so far

⚠ Swiss Chems FDA warning letter December 2024 — my results so far

Dr.SportsMedIN Thu, Jan 9, 2025 at 6:28 AM 8 replies 1,447 viewsPage 1 of 2
This thread is more than 14 months old. Information may be outdated. Consider searching for more recent discussions.
Dr.SportsMedIN
Senior Member
1,456
6,789
Feb 2024
Indianapolis, IN
Jan 9, 2025 at 7:53 AM#1

⚠️ QUALITY ALERT ⚠️

I sent a vial of compounded semaglutide (Lot# SEM-2026-0287) to an independent lab for full panel testing. Identity and potency came back fine (97.4% — no complaints there). But the endotoxin test came back POSITIVE.

LAL (Limulus Amebocyte Lysate) test result: 8.2 EU/mL

The USP limit for injectable products is 5 EU/kg/hr, and most compounding pharmacies use a limit of ≤0.5 EU/mL for their products.

My result is 16x over the typical limit. I've been using this vial for 2 weeks.

I'm freaking out. What are the health implications? Has anyone else had this experience? I've already reported this to the pharmacy and my state board. I'm naming the pharmacy in this post because I think people need to know — it's [REDACTED BY MOD].

30 2lucas_SP_BR, lisa_labSD, adam_van and 27 others
Reply Quote Save Share Report
LondonLisa
Member
912
3,456
Mar 2024
London, UK
Jan 9, 2025 at 8:10 AM#2

Andy, I've redacted the pharmacy name per forum rules — we can't allow naming without verified documentation. Please send the lab report to mod mail and we'll review. If verified, we'll allow the name to be posted. This protects both the community and the forum from liability.

That said, this is a serious report and I'm escalating it internally. 🔴

48 18Dr.MetabolicMD, RetaRick_CA, JenPlateau and 45 others
Reply Quote Save Share Report
JennaRN
Senior Member
1,987
8,923
Mar 2024
Colorado
Online
Jan 9, 2025 at 8:27 AM#3

Andy — first, take a breath. Let me explain what this means clinically.

Endotoxins are lipopolysaccharides (LPS) from gram-negative bacterial cell walls. They can cause:

  • Fever (pyrogenic reaction)
  • Chills, body aches
  • In severe cases: sepsis, organ dysfunction

However, the risk depends on the dose delivered and your body's response. At 8.2 EU/mL with a small injection volume (say 0.1-0.2mL for a typical sema dose), your actual endotoxin exposure per injection was roughly 0.8-1.6 EU. For a 70kg person, the USP limit is 350 EU/hr (5 EU/kg × 70kg). So you were well under the systemic toxicity threshold.

That doesn't make it OK — the product fails specifications and shouldn't have been released. But you're likely not in medical danger from what you've already injected.

STOP using this vial immediately. If you develop fever, chills, or signs of infection at the injection site, go to the ER and tell them about the endotoxin exposure.

28 4BiostatsBrad, PeptideSynthNJ, Dr.KarenChen and 25 others
Reply Quote Save Share Report

Janoshik Analytical — Independent Testing

Trusted third-party HPLC & mass spectrometry analysis. Verify peptide purity with the lab the community relies on. Independent. Accurate. Transparent.

Verify Your Peptides
matt_MKE
Member
312
1,345
Sep 2024
Milwaukee, WI
Jan 9, 2025 at 8:44 AM#4

Thank you for running those numbers. That math actually makes me feel a lot better. I haven't had any fever or unusual symptoms beyond normal sema side effects. Stopped using the vial immediately when I got the results.

I've sent the full lab report to mod mail. Happy to have the pharmacy name posted once verified. People need to know.

Last edited: Jan 9, 2025 at 11:44 AM
13 9carl_compliance, DanielChem_CHI, marco_milano and 10 others
Reply Quote Save Share Report
KetoKyle
Member
678
3,456
Jul 2024
Utah
Jan 9, 2025 at 9:01 AM#5

Former QC lab director weighing in. An endotoxin result of 8.2 EU/mL indicates a fundamental failure in sterile manufacturing processes. Endotoxins come from gram-negative bacteria, which means at some point in the production chain, bacterial contamination occurred. Even if the bacteria were killed during filtration/sterilization, endotoxins are incredibly heat-stable and difficult to remove.

This could indicate:

  • Contaminated raw materials (API or water)
  • Inadequate depyrogenation of glassware
  • WFI (Water for Injection) system failure
  • Environmental monitoring failures in the cleanroom

If one batch has this issue, others from the same facility likely do too. This is a systemic problem, not a one-off.

9 18JakeBK_lifts, DerekSJ_a1c, paige_pharma and 6 others
Reply Quote Save Share Report

Similar Threads

⚠ Peptide Sciences SHUT DOWN March 6, 2026 — what happened and what to do now8 replies
⚠ Amino Asylum raided by FDA June 2025 — warehouse seized6 replies
⚠ Swiss Chems FDA warning letter December 2024 — selling unapproved drugs6 replies
⚠ 50+ FDA warning letters sent to peptide vendors in 2025 — full list4 replies
⚠ Finnrick exposed: some vendors scoring E grade on basic peptides4 replies
ForumsNewTrendingMembersAccount

Log In

Forgot password?
No account? Register